Is your Brother printer not working, or are you having trouble connecting to your laptop? If there’s an issue that’s creating problems, then restoring the setting of your Brother printer to default settings from the factory could assist in solving Brother printer in error state windows 10 issues.
Restoring your printer to the factory default settings is also a smart method to secure sensitive data such as passwords and security settings from being accessed by anyone other than you. This is a great alternative if you’re sending your Brother printer for repairs or want to dispose of or recycle the printer.
How do I change my Brother printer to default settings?
In the event of having to reset the settings of a Brother printer back to its original settings. Three options are offered:
- Network Resets the printer server’s internal settings to its default settings with the password security and the IP.
- Address & Fax. Resets all stored phone numbers and setting for fax.
- Printer settings reset back to default settings from the factory.
It is vital to remember that setting your Brother printer back to its default settings is an action you can’t undo. It is suggested to make copies of backup copies of your documents, archives, passwords, and IP addresses before you make the change.
Reset Brother Printer to Network, Address & Fax, or All Settings
- Connect the cable that connects to the Internet for Network and the reset function for all settings.
- Utilize to access the menu on your Control Panel.
- Utilizing the Up, or Arrow keys, select Initial Setup and then hit OK.
- Using the Up and Down Arrow keys, select Reset, then press OK.
- Utilizing the Up and Down Arrow keys, select the reset option of your preference, after which click OK.
- Follow up by performing any of the actions listed above.
- To reset all Settings, Press “1” and follow the next step.
- If you want to leave without modifications, you can hit “2”.
You’ll be asked to restart your printer. You may continue by following any of these steps
- If you’d like your printer reset, hit “1”. To reset the printer, click “1”.
- If you’d like to quit with no reset, click 2.
The steps only apply to Brother models MFCL2685DW, the MFCL2700DW, and the MFCL2705DW. Go through the user’s guide to find a specific procedure for setting your Brother printer to its factory default settings.
Factory Reset Brother Printer (Alternative Steps)
The method to reset differs based on the Brother printer you have. You can try the alternate plan if the steps above don’t work.
Step 1. Switch off the Brother printer, then disconnect the power cord from its outlet.
Step 2. Shut off all lids and covers before going on.
Step 3. Plug the power supply to the outlet.
Step 4. Make sure you press the long “go” option on the front panel control of your printer.
Step 5. Hit the power button while holding your fingers on your “go” button.
Step 6. Make sure the machine is fully operational before you proceed.
Step 7. Release the hold by pressing the “go” button “go” button.
Step 8. Look for light signals to become stable before slowing down and moving on.
Step 9. If the light indicators are on, Click”Go” six times, “Go” six times “Go” switch six times.
Step 10. Step 10. Your Brother Printer will reset itself to initial factory default settings.
factory reset of the Brother Printer through the use of software
The two reset techniques discussed earlier require the Brother printer’s control panel. It’s also useful to eliminate Brother Printer shows offline error. However, you can change the settings of your Brother printer to default settings, which it had when it first was installed on your computer, using the software that runs your printer.
- Start your browser on the internet before you go for support.brother.com.
- Input the model of your printer into the Search by Model Name search box, then search and select your printer from the Search by Product Category below the search box.
- Choose the OS (Operating System) and then click OK.
- After that, you’ll be taken to the list of drivers and programs downloaded via Brother, like the ControlCentere4, that can improve the printing experience overall. Scroll down on the Management Tools list and then select BRAdmin.
- Follow the steps on how to install the program.
- Start the downloaded program and follow the steps in the display.
- Begin by going to BRAdmin and then select Brother MFC2700DW to reset the device.
- Select control, then select the network configuration.
- If asked, type in your password, then click OK.
- On the menu Control, choose Factory Reset.
You may also resolve your Brother Printer offline by setting your printer. You can alter the setting of your Brother Ink and toner cartridges, especially when using compatible cartridges. Compatible Brother cartridges and inks are cheaper than OEM cartridges, but you’ll need to disable the printer’s protection mechanism for cartridges to ensure that they work efficiently. Resetting the cartridges for ink or toner will help with this.